Its cost is comparable with steep roofs, which are common for our country. The material has high adhesion and vapor permeability, excellent for internal and external finishing works. The Apis Cor and PIK companies have successfully completed the project which was announced in December 2016. It means it’s time to talk about the new fantastic potential of architectural solutions. Technology does not require fixtures and fills all voids in the space between the bearing wall and outer concrete structure, avoids the formation of cold bridges. Printing of self-bearing walls, partitions and building envelope were done in less than a day: pure machine time of printing amounted to 24 hours. That will significantly reduce the construction time.After completing the wall structures, the printer was removed from the building with a crane-manipulator. The solution proposed by the TechnoNICOL company can effectively withstand high snow loads and durability requirements. Paint is easy to apply and easily fills the roughness, after drying up it forms a solid matte surface without cracks, is eco-friendly and resistant to weather conditions. The house can be of any shape, including the familiar square shape, because the additive technology has no restrictions on design of new buildings, except for the laws of physics.A special insulation PIR Slope was used during flat roof installation.Design of the single-story residential house is rather unusual. Due to low thermal conductivity of the material (0. Although, the equipment itself is able to operate in temperatures down to minus 35° C.A distinctive feature of the printer is its design, which is reminiscent of the tower crane, allowing the printer to execute the printing process of constructing the building both inside and outside. The problem was solved by setting up a tent which provided the required temperature. It is a ready-made modular system to create the right main and rear slopes. In the future, with improved equipment, insulation of structures can be carried out in parallel with their printing.Selected materials are among the ones with the lowest thermal conductivity coefficient.The roofing carpet is made of LOGICROOF polymer membranes. Construction took place at the Apis Cor company’s test facility in the town of Stupino, on the territory of the Stupino aerated concrete factory. Coefficient of heat conductivity of PIR crumbs −0.The area of the printed building is 38 m². Possesses good hydrophobic properties.FINISHINGFor the printed walls finishing we additionally used a mineral decorative plaster Reibeputz — KOROED from the manufacturer BITEX.The printer has a small size, easily transportable and does not require long preparation before the commencement of the construction works because it has a built-in automatic horizon alignment and stabilization system.

The material has high performance and technological installation.The house was erected in the coldest time of the year.WINDOWSThe the house we installed double windows provided by the partner company Fabrika Okon, which develops innovative windows with climate control.Apis Cor construction 3D printing technology adapted for different methods of printed walls thermal insulation. Polymer membrane LOGICROOF and insulation LOGICPIR have a combustibility class G1 which provides high fire safety. This project was selected specifically, as one of the main purposes of this construction is to demonstrate the flexibility of equipment and diversity of available forms. Easy to use and work with. Installation works at speeds of up to 1000 m² in a work shift can be done in any weather conditions. That allows to greatly simplify the structure. Winter has added complexity to the project participants, as the use of concrete mixture, that is used as the printing «ink», is only possible at temperatures above 5° C.INSULATIONInsulation system in the printed house was done using innovative materials of TechnoNICOL companyROOFThe roof of the house in Stupino, in accordance with the architectural project, is flat.022 w/m * k, fill insulation from polyurethane foam- 0.As a heat-insulation layer we applied solid plates on the basis of LOGICPIR hard polystyrene.Soon, using new materials, such as geopolymer, you will be able to print a house at any time of the year. Performs the function of a thin-layer decorative plasters on walls that do not require insulation.

For painting of the entire building in a corporate yellow color we used high-quality exterior paint from BITEX Egalisationsfarbe manufacturer.The first house printed using mobile 3D printing technology has been built in Stupino town, Moscow region.OVERLAPPINGSAs overlap insulation we used rock wool ROKLIGHT thermo-acoustic insulating material.022 w/sq.m), thickness and total weight of the roofing system is much smaller than traditional insulation materials. Because of this, precipitation will be effectively removed from the surface of the roof.The printing process is automated as much as possible and almost eliminates the risk of human error.023-0, 025 w/m * k (roughly 25-30% more efficient in comparison with standard thermal insulation materials and 100% more efficient than wood). Specially for the project in Stupino, TechnoNICOL corporation chose two innovative ways of insulation: solid insulating material LOGICPIR for one part of the house and liquid polyurethane composition for the other.Thanks to these properties, to create a comfortable microclimate in the house, quite a small layer is enough.The composition of mineral plaster consists of white cement and ball-shaped marble and granite Wholesale Party Tent Factory crumbs, so it can serve as an additional heat insulation and goes well with the thermal insulation systems: can act as a top layer, especially if the insulation used is mineral wool.HOW IT WAS BUILTIn December 2016, the Apis Cor company in cooperation with PIK proceeded to print the building using a mobile 3D printer. Membrane patches are welded together with special equipment using hot air.THE TECHNOLOGY AND MATERIALS USEDCONSTRUCTIONConstruction is based on Apis Cor 3D printing technology — a unique equipment, which has no analogues in the world today: mobile construction 3D printer and automatic mix and supply unit.

Megosztás a facebookon

The people at the farm even help people with pet adoptions, irrespective of whether someone is a first-time owner or not.". Mr Sachdev, the owner of Phoebe’s Farm, said, "Pet owners are offered overnight/ weekend/weekday stays at the farm with their family and friends.Most of the dogs in the farm, called Phoebe’s Farm, are ones that were rescued and brought there for the chance of a better life. These animals are made to adapt to their surroundings and live comfortably, with improved behavioural patterns.The people attached to the farm believe that it is designed with an aim to ensure that animals, who otherwise tend to be given a raw deal in life, have ample scope for enjoyment. In fact, with first-timers, the farm helps people adopt the perfect pet for them, based on the lifestyle of the family concerned. The location of the farm was planned keeping in mind the nearby spots for people to visit and it being equidistant from Mumbai and Pune.

It is a seven-tent and three-room resort. "Phoebe’s Farm seems to be a slice of paradise for pets and pet parents, and for nature lovers," said Purnachandra Gowda, a dog lover who had recently been to the farm with his friends and family.Animals at the farm are made to adapt to the surroundings and live comfortably with improved behavioural patternsEven as increasing reports surface about cruelty towards animals, Mr Manoor Sachdev, an animal behaviourist, has started an animal farm for traumatised animals — including dogs, donkeys, emus, turtles, fish and cattle — where animal lovers can even come and stay, with or without their pets. The farm also offers group-stay facilities for all sorts of people, regardless of whether they own a pet." He added, "We get around 25 rescued animals every month.Plus, when pet owners take their pets there for a weekend stay, this six-acre farm has multiple facilities for both the animals and their owners, who can go for an early-morning trek or fold up gazebo cycling in the woods or by the river, take a dip in the dog pool that has a 360-degree view of the Sahayadris, sit by the Amba river with a cup of coffee, soak up the peace and solitude by a pond there or simply enjoy a rustic home-cooked meal.

Megosztás a facebookon

Goswami said the mortal remains of the soldiers are being evacuated from the avalanche area, after which a wreath-laying ceremony will be held to honour them. He added, "The Indian Army fraternity stands shoulder to shoulder with the bereaved families in their hour of grief. A tenth soldier, Lance Naik Hanamanthappa Koppad, a resident of Betadur village in Dharwad district of Karnataka, was miraculously pulled out alive from an "Arctic tent" under 25 feet of frost and snow, though in critical condition, on February 8, six days after the incident.At 8 am on Friday, a military foot patrol was hit by an avalanche in Turtuk area and two jawans were swept away."Col.. Gen.The death toll in Friday’s avalanche in Turtuk area, close to the Line of Control (LoC) in wholesale beach chairs Jammu and Kashmir’s Ladakh region, rose to two after rescuers on Saturday found the corpse of the missing Army jawan buried under snow. Turtuk, at a height of 10,000 feet above sea level in Nubra Valley, is quite close to the LoC and was part of Pakistan-occupied-Kashmir before the 1971 war. But he died at the Army’s Research and Referral Hospital in Delhi three days later. One of them, Sujit, was immediately rescued and is recovering in a military hospital.

Turtuk is one of the gateways to the Siachen glacier. Hooda, Northern Command chief, expressed his deep condolences to the families of the victims. On February 3, nine Army soldiers, including a junior commissioned officer, were buried alive when a huge wall of frost and snow crashed into Siachen glacier, smothering a vast area which also had an Army camp on its southern side at an altitude of 19,600 feet in eastern Ladakh.S. Lance Havildar Bhawan Tamang, who was rescued from beneath several feet of snow immediately after the incident, died of critical injuries at a medical facility in the area later in the day. The victim was a resident of Vallaramapuram village of Thirunelvelli district, TN. Goswami said.D. The victim has been identified as Rifleman Sunil Rai. S. But his colleague, Sepoy Vijay Kumar K, was missing after the mishap and his frozen corpse was retrieved from under 15 feet of snow three days later by rescuers. In a similar incident, two Army jawans were swept away by an avalanche triggered by a mild earthquake at an Army post in Biamah area, at an altitude of 17,500 feet above sea level, close to the LoC in Kargil sector.

Megosztás a facebookon